Air Command Heron 2.2*
 The Heron 2.2 is a compact split system air conditioner,
which suits caravans and pop-tops up to 17’6”.
The air handler outlet has an attractive white fascia
panel with easy to use controls that fits into an
overhead Cupboard. The low profile compressor is usually
installed at floor level under a seat box, bed or
cupboard assembly.
When looking at the installation of a heron 2.2 the
following issues should be considered:
- Cabinet work required to sympathetically
accommodate the air handler and compressor.
- Additional clearance space required behind and
below the air handler.
- Method of disguising piping between the air
handler and the compressor.
- The need for a refrigerant plumber to commission
and certify the unit.
- Requirement to mount the compressor on the off
side of caravan to avoid return air within the
annexe (if applicable).
- The need for a 240 Volt outlet near the
compressor.
*Heron 2.2 is Australian designed and manufactured.
Hardings say: “A neat, internal unit suiting
small to medium caravans”.
| Key Specifications |
| Voltage (V) |
240V |
| Cooling Capacity (kw) |
2.2 |
| Heating Capacity (kw) |
1.5 |
| Weight |
34 Kg |
Heron 2.2 specifications:
http://aircommand.com.au/herospk.htm
Air Command Heron 3.0*
The Heron 3.0 is a compact split system air conditioner,
which suits caravans and pop-tops up to 23’.
The air handler has an attractive white fascia panel
that fits into an overhead Cupboard and a separate
compressor that is installed at floor level.
When looking at the installation of a heron 3.0 the
following issues should be considered:
- Cabinet work required to accommodate air handler
and compressor.
- Clearance space required behind and below the
air handler.
- Method of disguising piping between the air
handler and the compressor.
- The need for a refrigerant plumber to commission
and certify the unit.
- Requirement to mount the compressor on the off
side of caravan to avoid return air within the
annexe (if applicable).
- The size of the compressor often makes it
difficult to install the heron 3.3 “after market”.
- The need for a 240 Volt outlet near the
compressor.
*Heron 3.0 is Australian designed and manufactured.
Hardings say: “The most powerful split system
unit that suits larger vans ”.
| Key Specifications |
| Voltage (V) |
240V |
| Cooling Capacity (kw) |
2.5 |
| Heating Capacity (kw) |
1.5 |
| Weight |
40 Kg |
Heron 3.0 specifications:
http://aircommand.com.au/herospk.htm
Dometic Climaster
 The Climaster Air conditioner is a
compact reverse cycle unit suiting caravans and
pop-tops up to approximately 16’6”.
The compressor unit is mounted at floor level under
a bed or cupboard and three pipe connections allow
outlets to be installed precisely where you want the
cold or hot air.
When looking at the installation of a Climaster the
following issues should be kept in mind:
-
Adequate space inside
cupboard/bed to accommodate compressor. (See
diagram below)
-
Method of disguising piping
between outlets and compressor.
-
Requirement to mount the
compressor on the off side of caravan to avoid
return air within your annexe (if applicable).
-
The need for a 240 Volt outlet
near the compressor.
-
The need to run ducting in a
manner that minimises impact on storage spaces.
| Key Specifications |
 |
| Voltage (V) |
240V |
| Cooling Capacity (kw) |
2.2 |
| Heating Capacity (kw) |
1.9 |
| Weight |
32 Kg |
Hardings say: “A unique concept in the air
conditioning market with outlets fitted in your
preferred location”.
|
